The secret to exterior mold & mildew removal for brick is using the right method, not the most pressure. In Isle of Normandy, FL, we match the cleaner and pressure to the surface so it comes out clean without damage. For brick, that means low-pressure wash.
The right method for the job
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
Cleaning brick safely
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
Signs you need exterior mold & mildew removal for brick
- Black, green or gray spots and film
- Slippery walkways and decks
- Musty smell near shaded walls
- Growth that returns soon after rinsing
What causes the dirt and stains
- Shade, humidity and poor air flow
- Organic debris and pollen
- Surfaces that stay damp after rain or sprinklers
Easy upkeep between cleanings
- Improve sun and air flow by trimming plants
- Keep gutters and sprinklers from soaking walls
- Clean small areas with an outdoor mildew cleaner, following the label
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Blasting growth off without killing it, so it grows back fast
- Mixing cleaning chemicals, which can release toxic gas
- Damaging plants with runoff
How we handle exterior mold & mildew removal for brick
- Identify surfaces and growth
- Protect plants and fixtures
- Apply a solution that kills the growth
- Rinse at low pressure
- Post-treat where helpful to slow regrowth
This service is for outdoor surfaces. Mold inside the home, in attics or in wall cavities needs a mold remediation specialist, not a pressure washing company.
How much does exterior mold & mildew removal for brick cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Pre-Paint Washing for Brick
- Commercial Pressure Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Exterior Mold & Mildew Removal for Brick in Isle of Normandy, FL
Mildew and algae are the main reason Florida homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.
Parts of Florida are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.
Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.
Spring pollen season in Florida coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.
Much of Florida has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
Besides Isle of Normandy (ZIP codes 33138, 33140 and 33141), we handle exterior mold & mildew removal for brick in North Bay Village (1.3 mi), Surfside (1.9 mi), Bay Harbor Islands (2.4 mi) and Bal Harbour (2.7 mi). Call (555) 010-0000 for a free quote in Isle of Normandy.
Exterior Mold & Mildew Removal for Brick: frequently asked questions
How much does exterior mold & mildew removal for brick cost in Isle of Normandy, FL?
Exterior Mold & Mildew Removal for Brick typically costs $250-$700 for typical exterior growth on a home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for exterior mold & mildew removal for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is exterior mold & mildew removal for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule exterior mold & mildew removal for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.